USB Thumb Drive Mode
This mode exposes either your SD card or configured images over USB.
📝 Note:
Pico 1 and 2 both use USB 1.1
SD card
Plug in the BlueSCSI to a computer via USB. By default the SD card will show up as a thumb drive.
To disable this behavior such as when you wish to power the device via a computer add this to your bluescsi.ini
file:
[SCSI]
EnableUSBMassStorage=false
Images
If you would like all the currently configured images to be presented instead of the SD card you can set this in the bluescsi.ini
file:
[SCSI]
USBMassStoragePresentImages=true
Interactive Console
By connecting to your BlueSCSI via a terminal like CoolTerm, TerraTerm, or Putty and typing h
you will see a help menu with commands you can run on the BlueSCSI.
Available commands:
r - Reboot
m - Reboot into mass storage mode
b - Reboot into uf2 bootloader
d - Toggle debug logging
h - Show this help message
This wiki has been updated 851 times by 81 people like you! Click here to edit this page. Generated 2025-07-08