A driver for the Amiga has been created by @RobSmithDev to use the DaynaPORT emulation in BlueSCSI. You will need to install the Amiga driver from https://github.com/RobSmithDev/daynaport-amiga/releases/tag/release.
Note: Use the v2024.10.26 or newer.
Create a blank file on the BlueSCSI SD card called NE4.hda. If you are already using device number 4, then change this to a number you aren’t using.
Copy the scsidayna.device to devs:networks and then setup this device for your network stack.
For example, follow the instructions in https://github.com/cnvogelg/plipbox/blob/master/doc/src/amiga.md
For this driver to work it needs to be configured.
Included in this archive is a file called scsidayna.prefs
This file needs editing and then copying to ENVARC:
device= change to the SCSI driver for your card
deviceid= The SCSI device ID the DaynaPORT device is on, or -1 for auto-detect
priority= The task priority. 0 is recommended, 1 will give hgiher speed but slower machine
mode= **VERY** important:
0: Original DaynaPORT Interface
1: Use with scsi.devie (A590/A2091)
2: Use with gvpscsi.device
autoconnect=0 If set to 1, the driver will attempt to connect to WIFI on startup
ssid= The WIFI network name to connect to
key= The WIFI password
For Amiga WiFi help directly you can join RobSmithDev’s discord server
For a step-by-step guide on installing, check out this video by Retronaut
Generated 2024-12-11